Description     The SpartanStart is designed to be used across a wide range of RV air conditioner units, up to 20K BTU. Unlike commonplace designs, this soft-starter only requires access to the compressor’s three wires (Run, Start, and Common). Very easy installation, only 6 wires, 3 per side! Made in Australia.   SpartanStart RV A/C Soft Starter Features: Start up to a 20K BTU RV AC with a 2200 watt power inverter or generator! Not only will the SpartanStart reduce the drain on your battery bank during startup, it also greatly reduces A/C compressor noise and vibration. EASY INSTALL: Just 3 wires (6 crimps). The SpartanStart goes inline with your compressor. Find the wiring diagram on your A/C that shows the R (Run), C (Common), & S (Start) wires coming off the compressor. Match & connect those wires to the appropriate wires listed on the SpartanStart. Done! For full installation instructions, please consult the manual or give us a call. LED STATUS LIGHTS: Easy to read LED lights to display current SpartanStart status. WHAT’S IN THE BOX?: 1 soft starter, 6 splice connectors, 1 cleaning wipe, 2 automotive grade mounting tape strips WARRANTY: Three years. Made in Australia, service & support in Reno, Nevada USA   Parts List: 1x SpartanStart Soft-Starter 6x Splice Connectors 1x Alcohol Wipes 3M automotive Adhesive Mounting Tape   Warnings: All voltage to equipment must be disconnected before removing any device Allow 2 minutes to discharge run capacitor before disconnecting Do not swap the Run and Start Windings Poor crimping can lead to heating & subsequent damage to the soft starter Not compatible with Dometic Penguin II units equipped with heating function